Samsung LCD TV User Manual page 15

up and down. Then press the ENTERE button. Press the ► button to Select Size, then press the ENTERE button. Press
the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button.
After selecting Screen Fit in HDMI (1080i) or Component (1080i) mode: Select Position by pressing the ◄ or ► button. Use
N
the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting.
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan
N
function.
Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3 (New Zealand, Singapore only)

When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS
(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is
intended for users to select it.
● 6:: Sets the picture to 16:9 wide mode.
● Wide Zoom: Magnify the size of the picture more than 4:3.
● Zoom: Magnify the size of the picture vertically on screen.
:: Sets the picture to 4:3 normal mode.
●
This function is available in Auto Wide mode.
N
This function is not available in PC, Component or HDMI mode.
N
Digital NR → Off / Low / Medium / High / Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
N
HDMI Black Level → Normal / Low

You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
N
Film Mode → Auto

The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).
N
Picture Reset → Reset Picture Mode / Cancel
❑
Resets all picture settings to the default values.
Reset Picture Mode: Current picture values return to default settings.
N
[650_Aus]BN68-02089G-01Eng.indb 13
English - 
2009-08-21 ¿ÀÈÄ 1:40:35