Kenmore 1347 Instructions Manual page 20

Fig 1
The feed dog contro! is located on the
right front of the machine bedplate,
There are a few times when you want
to control the feeding of the fabric
yourself When the control is turned
to the left, the feed dogs drop and do
not move the fabric,,
For most of your sewing, turn knob to
the right, "U" (Feed dog up)
J
Fig 2
The light and power switch shown
above in Fig, 1 provides the electric
current for the motor as welt as the
light In order to operate the machine,
this switch must be on,
To turn on the light, depress the
switch.
If you are interrupted whi!e sewing
and must leave the machine unattend-
ed, just turn off the switch and the ma-
chine cannot be started accidentally,
The sewing light is located inside the
face cover plate as shown To replace
the bulb, turn light off, and swing the
face cover plate open Push up on the
bulb slightly and turn bulb clockwise
Remove bulb from socket Push in
new bulb and turn counter-clockwise