Appliance Setup; Remove Shipping Materials; Clean The Appliance; Accessories - Heat & Glo CRESCENT II CRESCENT II Owner's Manual

12 12

Appliance Setup

A. Remove Shipping Materials
Remove shipping materials from inside and underneath the
fi rebox. A shipping bracket on the bottom front face must
be removed. Remove the screws and shipping bracket and
discard (see Figure 12.1).
Figure 12.1
34
SHIPPING
BRACKET
REMOVE (4) NUTS
AND SHIPPING BRACKET
Heat & Glo • Crescent II • 2083-902 Rev. N • 7/09
B. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the fi rebox or underneath in the control cavity.
C. Accessories
Install approved accessories per instructions included
with accessories. See Service Parts List for appropriate
accessories. Refer to Section 16.
WARNING
Shock or fi re risk.
Use ONLY optional accessories approved for
this appliance.
• Using non-listed accessories voids warranty.
• Using non-listed accessories may result in a
safety hazard.
• Only Hearth & Home Technologies approved
accessories may be used safely.