Installing and Configuring the NVIDIA nForce 680i SLI Motherboard
CPU Configuration
Select
CPU Configuration
press
to display the CPU Configuration menu.
Enter
Limit CPUID MaxVal
x Intel SpeedStep
CPU Thermal Control
C1E Enhanced Halt State
Execute Disable Bit
Virtualization Technology
CPU Core 0
CPU Core 1
x CPU Core 2
x CPU Core 3
! ! ! ! " " " " $ $ $ $ % % % % :Move
Enter:Select
Figure 11.
CPU Configuration Menu
Limit CPUID MaxVal
!
Use this function to enable the set limit of the CPUID MaxVal to 3. Set to
Disable for Win XP.
CPU Thermal Control
!
Use this function to enable or disable TM1 and TM2 support. The options
are:
"
Disable
Disable support for TM1 and TM2.
"
TM1 Only
The CPU is thermally throttled by cutting active processor clock cycles.
"
TM2 Only
Thermal throttling is achieved by reducing the CPU multiplier and CPU
core voltage.
50
from the Advanced Chipset Features menu and
Phoenix – AwardBIOS CMOS Setup Utility
CPU Configuration
[Disabled]
Disabled
[Disabled]
[Enabled]
[Enabled]
[Enabled]
Enabled
[Enabled]
Disabled
Disabled
+/-/PU/PD:Value
F10:Save
F5: Previous Values
Item Help
# # # # # # # #
Main Level
Set linit CPUID MaxVal
to 3, should be
"Disabled" for WinXP
ESC:Exit
F1:General Help
F7:Defaults