MICROBOARDS TECHNOLOGY, LLC
Introduction
The PF-3 Print Factory is a robust automated inkjet CD and DVD printing solution. The PF-3 Print Factory has
a 100-disc capacity, making the task of printing large numbers of discs fast, easy and hands-free.
Fully Integrated Automation
Microboards combined our patented auto-loading system with HP's proven inkjet printer technology to give
users the highest output possible, both in image resolution and print speed. Since the PF-3 Print Factory is an
autoloading printer, no calibration of robotics or manual feeding of discs is required. The PF-3 Print Factory
connects by a single USB 2.0 interface to your computer.
Flexibility and Speed for Any Application
While the PF-3 Print Factory was designed to fill a need in the high-volume arena, it also has the ability to
print at 4800 x 1200 dpi on both DVD and CD media. With the included design software, users can enjoy its
benefits whether making a few discs or a few hundred.
What's Included
When unpacking your PF-3 Print Factory system, the following items should be included:
•
PF-3 Print Factory print system
•
PF-3 Print Factory Quick Start
Guide
•
Users Manual (This document)
•
Power Cord
•
USB 2.0 Printer Cable
•
Blank Printable CD's
•
3 Input Bin rods
If any of these items are missing, please contact your distributor or Microboards Technology
Technical Support department at 952-556-1639.
The PF-3 Print Factory installation disc includes an
Installer that will walk you through the process
step by step. Please perform the installation in
order as specified in the Installer before
5
connecting to a computer.
PF-3 PRINT FACTORY
•
100 disc output assembly
•
Microboards PF-3 Print Factory
Install CD (Includes Windows
2000/XP drivers, Printer Toolbox,
and SureThing Label software)
•
1 V102C Tri-color ink cartridge
•
1 V101B Black ink cartridge
•
Print Sample