Using The Timer; Setting The Sleep Timer; Setting The Daily Timer - Kenwood AP-300-B Instruction Manual

Using the timer

This System is equipped with sleep timer and
playback timer (the daily timer). (Timer recording is
not available with this System.)

Setting the sleep timer

The power of the System automatically turns off
after the shut-off time you set has elapsed.
You can set the timer up to 90 minutes in 10-minute
interval.
(Press repeatedly)
.
.
Each time you press the button, the shut-off time
changes.
While the sleep timer is set, "SLEEP" icon lights up.
0
To cancel the sleep timer, select "SLEEP OFF".
0
To check the remaining time until the
System shuts off
Press the [SLEEP] button once.
Example: the remaining time is 12 minutes
.
The remaining time is displayed for 5 seconds.
30
12

Setting the daily timer

Using the daily timer, you can wake up with your
favorite music.
Set the clock before setting the recording timer.
0
(page 14)
Tune into a station, load a disc, or connect a USB
0
device/iPod to the System, and make sure that
the source works properly beforehand.
Preset the desired station before setting the daily timer.
0
1
Display the timer setting screen.
.
2
Select and confirm on "TIMER".
/
(Press repeatedly)
.
3
Set and confirm the timer contents.
/
(Press repeatedly)
.
You can set the following items:
Press [H]/[I] to select the next or previous item.
0
The "hour" and "minute" of the starting
and ending time
During the setting, the "TIMER ON" icon
0
(starting time) and "TIMER OFF" icon
(ending time) flashes.
Playback source
Select the source from "CD", "USB", "FM", "AM".
When the selected source is "AM" or "FM",
0
select the preset number.
Playback volume
Continue on the next page