Presetting Stations - Kenwood AP-300-B Instruction Manual

Presetting stations

Up to 30 FM stations or up to 10 AM stations can
be stored in the memory.
1
Tune in to a station you want to preset.
2
Display the preset setting screen.
.
3
Select a preset number to store
information.
Remote control
(Press repeatedly)
.
You can also select by specifying the
0
number using the number buttons.
Examples:
To select preset no. 3: ` 3
0
To select preset no. 17: 1 7
0
If a preset number that has been registered
0
with a station is selected, the old registered
station is overwritten.
4
Store the station.
.
26
Main unit
/
(Press repeatedly)
To tune in to a preset station
Remote control
(Press repeatedly)
.
You can also select by specifying the number
0
using the number buttons.
to
.
Examples:
To select preset no. 3: ` 3
0
To select preset no. 17: 1 7
0
CAUTION
Depending on the signal condition, you may
0
have reception problems even for the preset
stations.
To erase the preset memory
1
Select the preset number you want to
erase.
2
Erase the preset station.
.
While "CLEAR?" is displayed, press [SET].
The selected station is erased. The subsequent
preset numbers of the stations are moved forward.
Empty preset numbers are automatically stored
0
as 87.50 MHz for FM and 531 kHz for AM.
Main unit
/
(Press repeatedly)