Listening To An External Device; Connecting An External Device - Kenwood AP-300-B Instruction Manual

Listening to an external device

Refer also to the instruction manual for the external
device.

Connecting an external device

1
Set the volume level of the System to
minimum.
To connect the analog terminal
2
Connect an external device to the AUDIO
IN jack.
Stereo mini plug
cord (not supplied)
External device (not supplied)
.
To connect the digital terminal
2
Connect an external device to the
DIGITAL IN (OPTICAL) terminal.
18V 3.35A
Optical digital cable
(not supplied)
Optical digital output terminal
TV, BD/DVD recorder, etc.
.
Headphone jack, etc.
NOTE
When the device is connected to the digital input
0
terminal, set the digital audio output setting for
the connected device (TV, BD recorder, etc.) to
"PCM".
Listening to an external device
1
Select "AUDIO IN" or "DIGITAL IN".
Remote control
/
.
.
2
Start playback of the external device.
Do not disconnect the digital audio player
0
during playback. It may cause malfunction.
3
Adjust the volume.
To adjust the audio input level
Adjust the audio input level when there is a contrast
between the volume of the external device
connected to the AUDIO IN jack and that of other
sources.
(Press repeatedly)
.
Press repeatedly to change the setting
LEVEL 1 : Standard audio input level
LEVEL 2 : Higher level than LEVEL 1
LEVEL 3 : Higher level than LEVEL 2
Main unit
(Turn)
29