ZyXEL Communications ADSL2+ 4-port Security Gateway Support Notes page 108

P-662H-D Series Support Notes
Step 4 Enter command 'bin' to set the transfer type to binary.
Step 5 Use 'put' command to transfer the file to the Prestige.
Example:
Step 1: Connect to the Prestige by entering the Prestige's IP and Administrator
password in the FTP software. Set the transfer type to 'Auto-Detect' or
'Binary'.
Step 2: Press 'OK' to ignore the 'Username' prompt.
Step 3: To upload the firmware file, we transfer the local 'ras' file to overwrite
the remote 'ras' file.
To upload the configuration file, we transfer the local 'rom-0' to overwrite
107
All contents copyright © 2006 ZyXEL Communications Corporation.