Using Tftp Command On Windows Nt; Using Tftp Command On Unix - ZyXEL Communications ADSL2+ 4-port Security Gateway Support Notes

Step 4: To download the P-662H-D configuration, please get the remote file
'rom-0' from the Prestige.
Step 5: To upload the P-662H-D configuration, please save the remote file
as 'rom-0' in the Prestige.
An example:
The 192.168.1.1 is the IP address of the Prestige.
The local file is the source file of your configuration file that is available
in your hard disk.
The remote file is the file name that will be saved in Prestige.
Check the port number 69 and 512-Octet blocks for TFTP.
Check 'Binary' mode for file transfering.

• Using TFTP command on Windows NT

Step 1: TELNET to your Prestige first before using TFTP command
Step 2: Type the CI command 'sys stdio 0' to disable console idle timeout in
Command Line Interface (CLI).
Step 3: Download ZyNOS via LAN :
Step 4: Upload P-662H-D configurations via LAN:
[localfile] rom-0
Step 5: Download P-662H-D configurations via LAN:
rom-0 [localfile]

• Using TFTP command on UNIX

Before you begin:
All contents copyright © 2006 ZyXEL Communications Corporation.
P-662H-D Series Support Notes
c:\tftp -i [PrestigeIP] get ras [localfile]
c:\tftp -i [PrestigeIP] put
c:\tftp -i [PrestigeIP] get
105