Scenes - Boss BR-1180 User Manual

Scenes.

It is possible to store up to fifty SCENES on the BR-1180. A scene is basically a "picture"
of your current settings. Scenes "remember" all of your fader positions as well as pan and
EQ settings, effects send levels and insert effect parameters. You can call up a scene
manually or have scenes change automatically while a song is playing.
To enable the BR-1180 to include EQ and effects parameters go to UTILTY, CURSOR to
SYSTEM and press ENTER. Next CURSOR down to INS. EFFECTS and turn it ON. Then
CURSOR to TRACK EQ and turn it to ON. Levels, pan and effects sends are already
enabled.
To create a scene for manual recall, use the following procedure:
1) Make all of your channel settings. (level, EQ etc,)
2) Press UTILTY.
3) CURSOR to SCENE and press ENTER.
4) CURSOR to SAVE and press ENTER.
If an * appears next to a SCENE number then there is already a scene stored there. You
can overwrite it or you can use the VALUE wheel to select a new number.
To recall a scene use the VALUE wheel to select a scene number then CURSOR to
CALL and then press ENTER.
TRACK LEVEL in this menu determines if you want volumes to be called up by SCENES
or by FADERS.
Automation.
Auto Scene allows you to have scenes change while a song is playing back. For each
place that you want a change to occur, make your settings then hold down STOP and
press MARK. When you playback the song your scenes will change every time it passes
one of those markers.
To disable the Auto Scene function press UTILTY,CURSOR to SYSTEM then CURSOR
down to AUTO SCENE and turn it to OFF.
27