Agilent Technologies Agilent 35900E User Manual page 21

3
Computer Connection
To communicate with the 35900, you must assign it an IP address compatible
with the site LAN. The TCP/IP MIO card must receive its address from a BootP
server/service (or DHCP server if supported by the Agilent data system). The
TCP/IP MIO card MAC address (see Figure 4) is printed on a label on the
outside of the TCP/IP MIO card as seen in Figure 3.
SN #CN00000000
Lan Id
000000000000
MAC address
Figure 4 Location of MAC address
For more information on installing and using a Bootp server/service, refer to
instructions for the Agilent data system.
User Manual 21