Removing A Cooling Fan And Oven Light Socket - Whirlpool RS160LXT Manual

REMOVING A COOLING FAN AND OVEN LIGHT SOCKET

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug range or disconnect power.
2. Pull the range out of it's mounting location
so that you access the rear of the unit.
3. Remove rear panel. (see removing rear
panel page 4-6 for procedure).
4. To remove cooling fan:
a) Unplug cooling fan connector.
b) Remove two screws holding cooling
fan to rear of unit.
c) Remove cooling fan from unit.
Cooling Fan
Screws
Cooling Fan
Connector
5. To remove oven light socket:
a) Open the oven door and remove oven
racks from the inside of oven.
b) Unscrew the lens and bulb from the
oven light socket assembly and remove
them.
Lens & Bulb
c) Disconnect the two wire connectors
from the oven light socket terminals.
d) Move the insulation out of the way, and
press in on the two locking tabs of the
oven light socket, then push the socket
out of the liner opening.
4-7
Oven Light Socket
Oven Light
Socket