Pl-43Hdx Inputs And Controls - Runco PlasmaWall PL-43HDX Owner's Operating Manual

Flat panel display monitor & vivix pfp controller with widevision
Hide thumbs Also See for PlasmaWall PL-43HDX:
Table of Contents

Advertisement

PL-43HDX INPUTS AND CONTROLS

8
~16
R
SPEAKER
+
1
1
SPEAKER (R) terminal
For connection of an external right speaker.
Connect a speaker whose impedance is 8 -16 Ω.
2
CONTROL IN/OUT (monaural mini jacks)
For connection of RUNCO components that bear
the SR mark. Making CONTROL connection
enables control of the main unit as a component in
a system.
NOTE: The main unit cannot be operated by the
wired remote control RV-V107.
3
COMBINATION IN/OUT
Used when a number of sets are controlled
collectively. Please use a mini DIN 6 pin cable
(straight, fully connected) available on the market
as the connecting cable.
NOTE: It has no ABL linking function. And it is not
compatible with the RM-V4000V or other
multi-projection. It is not output when the main
power is off.
4
RS-232C
This terminal is used for adjustments by a PC
(EIA-232-F standard). Use 9 pin to RJ-11 adapter
for phone type cord usage of "auto" control of the
PL-43HDX Panel.
INPUT5
DIGITAL RGB
14
RS-232C
CONTROL
COMBINA TION
IN
OUT
IN
OUT
2
3
4
5
6
7
10
AC INLET
11
12
INPUT1
(ON SYNC)
OUTPUT
G
B
ANALOG RGB
(ANALOG RGB)
5
6
INPUT1 (mini D-sub 15 pin)
For connection of components that have RGB
or component (applies only when equipped with
PL-43HDX) output jacks such as a personal
computer, DVD player, or external RGB decoder.
OUTPUT (INPUT1) (mini D-sub 15 pin)
Use the OUTPUT (INPUT1) connector to output
the video signal to an external monitor or other
component.
NOTE:
* The video signal will not be output from the
OUTPUT (INPUT1) connector when the main
power of this display is off or in standby mode.
* When connecting the main units in a series,
please set the number that can be connected as a
total of 5 including the set that the signal is initially
input to. But a condition for performing separate
sink or composite sink input and output is that the
sink level of the source used is at least TTL level
at 2.2k Ω terminal time.
INPUT2 (BNC jacks)
For connection of components that have RGB
or component (applies only when equipped with
PL-43HDX) output jacks such as a personal
computer, DVD player, or external RGB decoder.
8
~16
L
SPEAKER
+
13
INPUT2
AUDIO
(H/V SYNC)
R
HD
VD
INPUT
OUTPUT
(INPUT1/2)
75
2. 2
Ô
k
7
8 9 10

Advertisement

Table of Contents
loading

Table of Contents