Table of Contents
Advertisement
Figure 2-4 shows the rear connector panel on the DHD Controller.
Serial No
Video Processor / Controller
Figure 2-4. DHD Controller Rear Panel
1. HDMI OUT
Connect this to the DVI IN input on the CX-70DHD (see Figure 2-2).
2. ComLink (RS-232) OUTPUT
Connect this to the RS-232 IN input on the CX-70DHD, using the provided
communication cable.
3. HDMI 1 / HDMI 2 (Digital)
Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner
with a DVI or HDMI output.
4. HD1 / HD2 (5 x Analog BNCs)
Two inputs (five BNCs per input) for connecting either RGB or component
high-definition television signals. The DHD Controller automatically detects the signal
format: RGB(HV) or YPrPb, 480p, 720p, 480i, 576i or 1080i.
5. COMPONENT VIDEO (RCA connectors)
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for
component video from sources such as DVD players.
For best results, do not run your DVD player in progressive mode.
Tip
6. COMPOSITE VIDEO INPUT
Standard composite video input for connecting a VCR, laser disc player or other
composite video source.
7. S-VIDEO 1 / S-VIDEO 2
Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super
VHS (S-VHS) VCR.
CX-70DHD Installation/Operation Manual
INPUTS
R/Pr
G/Y
Model
R/Pr
G/Y
HDMI Out
HDMI 1
1
4
B/Pb
H
V
HD1
HD2
B/Pb
H
V
Pb
Pr
Y
HDMI 2
Component Video
3
5
9
2.3
DHD Controller Rear
Panel
8
9
SYSTEM CONTROL INTERFACE
TRIGGERS
1
2
3
IR
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
S-Video 1
Video
S-Video 2
RS-232 Out
RS-232 Control
10
6
7
2
Outputs
Inputs
Controls and Functions
CAUTION
!
RISK OF ELECTRIC SHOCK
DO NO T OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
100-230VAC 50-60 Hz, 165 Watts Max
Made In USA
11
12
13
Advertisement
Table of Contents
