Option Menu - BenQ T420 User Manual

36 The OSD (On-Screen Display) menu

Option menu

Name
Aspect ratio
PIP
(Picture in Picture)
Video Source
Auto
Adjustment
Clock
Frequency
Phase
H Position
V Position
Ambient Light
Sensor
Auto Detection
Option
Aspect ratio
PIP
Video Source
Auto Adjustment
Clock Frequency
Phase
H Position
V Position
Ambient Light Sensor
Auto Detection
Touch Feature
:Move
Displays the input image in its original aspect ratio (Original) or forces the
display to fill the input image on the entire display area (Full).
• ON/OFF: Turns on or off the PIP function.
• Main Input: Sets an input source for the main picture.
• Sub Input: Sets an input source for the sub picture.
• PIP Size: Changes the size of the sub picture.
• PIP Position: Changes the position of the sub picture.
• This feature is not available for AV and S-Video inputs.
• PIP is not available for all signal source combinations.
combination on page 45
• In PIP mode, only sounds from the Main Input picture will be available.
Sets the video input source.
Automatically optimizes image display for the VGA input.
Adjusts the clock frequency of the VGA or YPbPr input image.
Adjusts the phase of the
Adjusts the horizontal position of the
Adjusts the vertical position of the
Adjusts the ambient light sensitivity around the display.
Automatically detects available input sources.
ENTER
:Input
Description
for more information on supported combinations.
or YPbPr input image.
VGA
VGA
input image.
VGA
Full
YPbPr
16
22
OFF
ON
OFF
EXIT
:Exit
See Supported PIP input signal
input image.