Connecting the YPbPr component video input
1. Connect the VIDEO IN (COMPONENT) jacks on the display to the component
output jacks on an A/V device (such as a VCR or DVD player) using a component
video cable.
2. Connect the DVD player's audio output jacks to the AUDIO IN (AUDIO2 or
AUDIO3) jacks on the display using a suitable audio cable.
3. To view video image from this input, press the YPbPr button on the remote
control.
TL550 /
T650
T420
Audio cable
The cables are not supplied and should be purchased separately.
Component video cable
Setting up the display
DVD player / VCR
21