Table of Contents
Advertisement
Getting Connected and Installing Drivers
6.
To begin the installation, click [Next].
If the Software Installation dialog box appears, click [Continue Anyway] to proceed with
the installation.
* If you are unable to proceed, click [OK] to halt the installation, and then change the settings as
described in "Driver Signing Options Settings (Windows XP)" (p. 29).
The screen will indicate "Ready to install the driver."
* If any other message appears, proceed as directed by the message.
7.
Operation of the UM-3G
8.
Operation of the UM-3G
9.
Operation of the UM-3G
16
Set the UM-3G's [MODE] switch to MASTER.
Set the UM-3G's [UNIT] switch to 1.
Use a USB cable to connect the UM-3G to your computer.
Set to
MASTER.
Connect to the
computer's
USB connector.
Set to 1.
Advertisement
Table of Contents
