Advancetrac With Rsc Features - Ford Explorer 2009 Owner's Manual

Hide thumbs Also See for Explorer 2009:
Table of Contents

Advertisement

with RSC system can be restored by pressing the AdvanceTrac with
RSC
Off button again or by turning off and restarting the engine.
If you switch off the AdvanceTrac with RSC system, the sliding car
icon
will illuminate steadily. Pressing the AdvanceTrac with RSC
Off button again will turn off the sliding car icon
In R (Reverse), ABS and the Engine and Brake Traction Control features
will continue to function; however, ESC and RSC are disabled.
Button
functions
Default at
start-up
Button
Illuminated
pressed
momentarily
Button
pressed and
held more
illuminated
than five
seconds
Trailer Sway Control
When properly equipped, trailer sway control will use the vehicle's
AdvanceTrac with RSC system to detect and help reduce trailer sway
by applying brake force at individual wheels and, if necessary, by
reducing engine power. Trailer sway control is only enabled above
40 mph (64 km/h).
WARNING: Trailer sway control does not prevent a trailer from
swaying, it mitigates the sway from increasing once it has
occurred. If you are experiencing trailer sway it is likely that the trailer
is improperly loaded for the correct tongue weight or the speed of the
vehicle and trailer is too high. Pull the vehicle-trailer over to a safe
location to check the trailer weight distribution and tongue load and
reduce speed to a safe level while towing. If trailer sway is
experienced, SLOW DOWN.

AdvanceTrac with RSC Features

"Sliding
car"
RSC
icon
Off
Enabled
Disabled
below
solid
25 mph
(40 km/h)
Flashes
Disabled
then
below
25 mph
solid
(40 km/h)
.
Engine
ESC
Traction
Control
Enabled
Enabled
Disabled
Disabled
below
below
25 mph
25 mph
(40 km/h)
(40 km/h)
Disabled
Disabled
below
below
25 mph
25 mph
(40 km/h)
(40 km/h)
Driving
Brake
Traction
Control
Enabled
Enabled
Disabled
below
25 mph
(40 km/h)
287

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents