Ford Diesel 2012 Supplement Manual page 53

Maintenance and Specifications
4. Remove and install a new foam
filter if needed according to the
service interval indicated in the
scheduled maintenance
information in this guide. If the
foam filter is not being replaced, be
sure the existing foam filter is in
place.
5. Install a new air filter element. be
sure that the groove seal on the
pleated paper filter traps both sides
of the vertical partition of the air
box.
6. Replace the air filter housing
cover and secure the clamps. Be
careful not to crimp the filter
element edges between the air filter
housing and cover and ensure that
the tabs on the edge are properly
aligned into the slots.
7. Reconnect the mass air flow sensor electrical connector to the inlet
tube. Make sure the locking tab on the connector is in the "locked"
position.
53
2012 Diesel (67l)
Supplement (supplement), 1st Printing
Arabic_(LHD) (gc_lhd)