Table of Contents
Advertisement
TD-W8951NB
• PHONE: Connect to the phone sets
• MODEM: Connect to the ADSL port of TD-W8951NB
Plug one end of the twisted-pair ADSL cable into the ADSL port on the rear panel of
TD-W8951NB. Connect the other end to the MODEM port of the external splitter.
Step 2: Connect the Ethernet cable. Attach one end of a network cable to your computer's
Ethernet port or a regular hub/switch port, and the other end to the LAN port on the
TD-W8951NB.
Step 3: Power on the computers and LAN devices.
Step 4: Attach the power adapter. Connect the power adapter to the power connector on the rear
of the device and plug in the adapter to a electrical outlet or power extension. The
electrical outlet shall be installed near the device and shall be easily accessible.
150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
Figure 2-4
8
Advertisement
Table of Contents
