User Accounts - TP-Link TL-WR1043ND User Manual

Save - You can click the Save button to save your settings and the page will be
redirected to the media server configuration page.
Back - You can click the Back button to discard the settings and just go to the media
server configuration page.
To add a new share folder for your media server, please follow the instructions below:
1) Select the Share entire partition or a specified folder option.
2) Enter the display name of the share folder in Display Name edit box.
3) Click the Save button to save the configuration and the page will be redirected to the
media server configuration page as shown in Figure 4-41.
4. Click the Scan All button to scan all the share folders immediately. You can also select the
Auto-scan, at same time, select an auto scan interval time by drop-down list. In this case,
the media server will auto scan the share folders.
Note:
The max share folders number is 6. If you want share a new folder when the numbers has been
reached to be 6, you can delete a share folder and then add a new one.
4.8.4

User Accounts

You can specify the user name and password for Storage Sharing and FTP Server users on this
page. Storage Sharing users can use Internet Explorer to access files on the USB drive. FTP
Server users can log into the FTP Server via FTP Client.
There are two default user accounts that can access the Storage Sharing and FTP Server. They
are Administrator and Guest (as shown in Figure 4-42). Administrator has read/write access to
Storage Sharing and can access FTP Server while Guest has read-only access to Storage
Sharing and can not access FTP Server.
TL-WR1043ND
Figure 4-41 Media Server Setting
-56-
Wireless N Gigabit Router