Table of Contents
Advertisement
A
R
+ SE
VER 1022G-NTF User's Manual
•
Product safety information:
http://super-dev/about/policies/safety_information.cfm
For support, email
1-2
Serverboard Features
At the heart of the A+ SERVER 1022G-NTF lies the H8DGU-F, a dual processor
serverboard based on the AMD SR5670/SP5100 chipset. Below are the main fea-
tures of the H8DGU-F. (See Figure 1-1 for a block diagram of the chipset).
Processors
The H8DGU-F supports single or dual AMD Opteron 6100 Series processors in
Socket G34 type sockets. Please refer to our web site for a complete listing of
supported processors (www.supermicro.com).
Memory
The H8DGU-F has sixteen single/dual/tri/quad channel 240-pin DIMM sock-
ets that can support up to 128 GB of ECC/Non-ECC Unbuffered, 512 GB of
ECC Low-profile Registered LRDIMM, or 512 GB of ECC Registered DIMM
DDR3-1600/1333/1066 Mhz speed, SDRAM memory. Please refer to Chapter 5
for installing memory.
UIO
The H8DGU-F is a specially-designed serverboard that features Supermicro's UIO
(Universal I/O) technology. UIO serverboards have a PCI Express x8 slot that can
support any one of several types of UIO card types to add SAS ports, additional
LAN ports, etc. to the serverboard. This allows the user to tailor the serverboard
to their own needs.
Note: The server does not come with a UIO card installed.
Serial ATA
An on-chip (SP5100) SATA controller is integrated into the H8DGU-F to provide
a six-port, 3 Gb/sec SATA subsystem, which is RAID 0, 1, and 10 supported. The
SATA drives are hot-swappable units.
support@supermicro.com.
1-2
Advertisement
Table of Contents
