Lenovo 3057 Maintenance Manual page 60
Machine types: 3057, 3059, 3061, 3064, 3065, 3069, 3070, 3071, and 4306
Hide thumbs
Also See for 3057:
- Warranty and support information (44 pages) ,
- Garantie und unterstützungsinformationen manual (42 pages) ,
- (42 pages)
Table of Contents
Advertisement
Use the following instructions to connect cables from the RAID card to the expander card first:
• If you are using a ThinkServer RAID 500 Adapter, do the following:
1. Use a mini-SAS to mini-SAS signal cable and connect the mini-SAS connector on one end of the
cable to the port 0 on the ThinkServer RAID 500 Adapter. Then, connect the mini-SAS connector on
the other end of the cable to the connector 1 on the expander card.
2. Use another mini-SAS to mini-SAS signal cable and connect the mini-SAS connector on one end of
the cable to the port 1 on the ThinkServer RAID 500 Adapter. Then, connect the mini-SAS connector
on the other end of the cable to the connector 2 on the expander card.
• If you are using a ThinkServer RAID 700 Adapter, do the following:
1. Use a mini-SAS to mini-SAS signal cable and connect the mini-SAS connector on one end of the
cable to the ports 3-0 on the ThinkServer RAID 700 Adapter. Then, connect the mini-SAS connector
on the other end of the cable to the connector 1 on the expander card.
2. Use another mini-SAS to mini-SAS signal cable and connect the mini-SAS connector on one end
of the cable to the ports 7-4 on the ThinkServer RAID 700 Adapter. Then, connect the mini-SAS
connector on the other end of the cable to the connector 2 on the expander card.
• If you are using a ThinkServer RAID 710 Adapter, do the following:
1. Use a mini-SAS to mini-SAS signal cable and connect the mini-SAS connector on one end of the
cable to the port 1 on the ThinkServer RAID 710 Adapter. Then, connect the mini-SAS connector on
the other end of the cable to the connector 1 on the expander card.
2. Use another mini-SAS to mini-SAS signal cable and connect the mini-SAS connector on one end of
the cable to the port 2 on the ThinkServer RAID 710 Adapter. Then, connect the mini-SAS connector
on the other end of the cable to the connector 2 on the expander card.
Refer to the following topics for information about the connector locations on the RAID card and expander
card:
•
"RAID card" on page 37
•
"Expander card" on page 39
46
ThinkServer RD430 Hardware Maintenance Manual
Advertisement
Table of Contents
Troubleshooting
