Lenovo 2119 Maintenance Manual page 183
Machine types: 2119, 2121, 2697, 2698, 2742, 2750, 2756, 2800, 2929, 2932, 2934, 2935, 2941, 2943, 2945, 2960, 2961, 2967, 2982, 2986, 2988, 2992, 2993, 2994, 2996, 2999, 3181, 3182, 3183, 3184, 3185, 3186, 3187, 3190, 3198, 3201, 3202, 3204, 3207, 3208,
Hide thumbs
Also See for 2119:
- Hardware maintenance manual (282 pages) ,
- User manual (152 pages) ,
- Hardware maintenance manual (282 pages)
Table of Contents
Advertisement
6. Flex the retaining clips as shown to remove the hard disk drive from the bracket.
Figure 120. Removing the hard disk drive from the bracket
7. To install a new hard disk drive into the bracket, flex the bracket and align pin
5
on the bracket with the corresponding holes in the hard disk drive.
Important: Do not touch the circuit board
8. Connect the signal cable and the power cable to the new hard disk drive.
.
Chapter 10
Replacing FRUs (machine types: 2756, 2800, 2929, 2932, 2934, 2941, 2945, 2961, 2982, 2988, 2993, 2996, 3181,
3
on the bottom of the hard disk drive.
3183, 3185, 3187, 3198, 3202, 3207, 3209, 3214, 3218, 3224, 3227, 3306, 3393, and 3395)
1
, pin
2
, pin
4
, and pin
177
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
