Lenovo 2119 Maintenance Manual page 103
Machine types: 2119, 2121, 2697, 2698, 2742, 2750, 2756, 2800, 2929, 2932, 2934, 2935, 2941, 2943, 2945, 2960, 2961, 2967, 2982, 2986, 2988, 2992, 2993, 2994, 2996, 2999, 3181, 3182, 3183, 3184, 3185, 3186, 3187, 3190, 3198, 3201, 3202, 3204, 3207, 3208,
Hide thumbs
Also See for 2119:
- Hardware maintenance manual (282 pages) ,
- User manual (152 pages) ,
- Hardware maintenance manual (282 pages)
Table of Contents
Advertisement
Figure 20. Removing a PCI card
Notes:
a. The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small
amount until it is removed from the card slot.
b. If the card is held in place by a retaining latch, press the card retaining latch
disengage the latch. Grasp the card and gently pull it out of the slot.
5. Remove the new PCI card from its static-protective package.
6. Install the new card into the appropriate slot on the system board. See "Locating parts on the system
board" on page 75.
Note: If you are installing a PCI Express x16 graphics card, ensure that the memory slot retaining clips
are closed before you install the graphics card.
.
Chapter 9
Replacing FRUs (machine types: 2697, 2698, 2742, 2750, 2935, 2943, 2960, 2967, 2986, 2992, 2994, 2999, 3182,
3184, 3186, 3190, 3201, 3204, 3208, 3212, 3217, 3220, 3226, 3228, 3302, 3391, and 3392)
1
as shown to
97
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
