Table of Contents
Advertisement
Main memory
V
CAUTION!
If only CPU 1 is installed, the empty DIMM slots of CPU 1 must be
fitted with dummy DIMM modules to ensure sufficient cooling of the
system (this does not apply if two CPUs are installed).
If memory modules with different memory capacities are to be installed for a
CPU then the rule applies that the higher the capacity, the further away from
the CPU the memory module has to be mounted per channel.
The DIMM sockets must be populated per channel in the following order:
Channel 0 CPU 1: DIMM1A -> DIMM1B -> DIMM1C
Channel 0 CPU 2: DIMM1D -> DIMM1E -> DIMM1F
Channel 1 CPU 1: DIMM2A -> DIMM2B -> DIMM2C
24
Technical Manual
D3030 (BX920 S2)
Advertisement
Table of Contents
