Initiating A Video Conference From Your 150 Mxp; Requirements; Setting Up A Conference (Optional Feature); Video Meeting Features - Cisco TANDBERG?150MXP User Manual

Initiating a Video Conference From Your 150 MXP

Requirements

Your TANDBERG 150 MXP may be used
to initiate video conferences with several
participants, provided that:
•
You are connected to an MCU (Multi-
Conference Unit) supporting this.
•
Your TANDBERG 150 MXP is set up to allow
the use of external Multiway . This is set up
™
by your administrator and is described in the
Administrator Guide.
Table of Unpacking & Operating
Contents Installation Principles
D 14067.02
02.2010

Assuming you are in a call, press the
Hold
softbutton .

Press the softbutton Join to create the
conference.
Making Making
Making
Video Calls Using Telephone
Phone Book
Calls Calls
Setting Up a Conference (optional feature)

Press the softbutton the Add Call

The system will now disconnect you and
transfer the video conference to the MCU
(Multi-Conference Unit).
All participants, including yourself will be
called by the MCU and the conference can
start.
Phone Book Incoming
Details Calls
27

. Call second participant.

Repeat  –  until all participants
required have been added.
If the softkeys along the bottom of the
display are no longer shown, just press any
of the softkey buttons of the keypad.
If any of the participants (including you as
the initiator) disconnects, the conference
continues without the disconnected
person.
Calling More Calling More Video Meeting Contact
Than One Than One Features Information
TANDBERG 150 MXP
TANDBERG 150 MXP
USER GUIDE
USER GUIDE