Brother P-Touch 2100 User Manual page 68

TROUBLESHOOTING
Problem
The label is not cut
automatically.
Label files saved
previously are now
empty.
64
What to do when...
Cause
Is Cut Option set to Chain or
No Cut?
Does the tape compartment
cover open?
Have the batteries and AC
adaptor been disconnected?
Is there enough power
remaining in the batteries?
Have you used the Reset
function?
Solution
When these options are set,
the tape is not fed after
printing the label. Check the
Cut Option setting, or hold
down the key and press
the key to feed and
cut the tape.
If so, close the tape
compartment cover
correctly.
All files stored in the internal
memory are lost if the
batteries and AC adaptor are
disconnected for longer than
two minutes.
All data stored in the internal
memory is lost if the
batteries become empty.
The reset function clears all
data stored in the internal
memory, including label
files.