Brother P-Touch 2100 User Manual page 58

LABEL PRINTING
Setting
Large
Margin
Small
Margin
Chain
No Cut
• When using Fabric Tapes or Strong Adhesive Tapes, set "No Cut" and refer to "Feeding Tape"
on page 22 to apply the appropriate setting.
• The tape is not cut after the last label is printed when "Chain" or "No Cut" is set. Hold down
the
page 22) to feed and cut the tape automatically, or cut the tape manually if you are using Fabric
Tapes or Strong Adhesive Tapes.
• When using the Auto-Format function, the label is cut with a margin on the left and right ends
regardless of the current Tape Cutting Option Setting except as"No cut" is set.
54
Tape Cutting Options
Description
Automatically cuts the tape after each label is
printed. The labels have a 24 mm margin on
the left and right ends.
• When printing labels one at a time:
It automatically cuts a piece of blank tape
before printing the label, and then cuts the
tape after the label is printed.
• When printing several labels continuously:
It automatically cuts a piece of blank tape
before printing the first label, and then cuts
the tape after each label is printed.
• The labels have a 4 mm margin on the left
and right ends.
• When printing labels one at a time:
It automatically cuts a piece of blank tape
before printing the label, and then does not
cut the tape after the label is printed.
• When printing several labels continuously:
It automatically cuts a piece of blank tape
before printing the first label, and then cuts
the tape after each label is printed.
• The labels have a 4 mm margin on the left
and right ends.
• The tape is not fed and cut after the last
label is printed.
• Use this setting to print a strip of labels with
no cuts in between.
• Pressing the
key will feed and cut the last label
printed.
key and press the
Tape Cutting
while holding down
key, and select "Feed & Cut" (refer to "Feeding Tape" on
Example
ABC ABC
24 mm 24 mm
23 mm
ABC ABC
4 mm 4 mm
23 mm
ABC ABC
4 mm 4 mm
ABC ABC
27 mm 8 mm