Place Calls - Polycom CX700 Quick Start Manual

Startup
The Polycom CX700 will automatically
configure itself after power has been
supplied. After configuration is complete,
the Microsoft® Lync™ 2010 login screen
will appear.
Login
1. On the Phone Login screen, use the
touch screen to enter your sign-in
name (e.g., andreash@contoso.com).
2. Enter your network domain and user
name (e.g., contoso\andreash) and
your network password. Then touch
Sign In on the touch screen.
3. To keep access to your personal contacts
secure, you can choose to use
either a Personal Identifier Number
(PIN) or fingerprint security.
4. For PIN security, enter the PIN
(twice) that you want to use, then
touch OK.

Place Calls

You may place calls by using your Contact
List, company directory, or the key pad.
For more information, refer to the
Polycom CX700 User Guide.
Contact your system administrator for any
issues related to the Microsoft® Lync™
Server 2010 unified communications
client.
5. For fingerprint security, select Switch
to Fingerprint and swipe your finger
on the fingerprint reader until the
device recognizes your print (four
times).
6. When the presence icon lights up,
you're connected to Microsoft®
Lync™ Server 2010 and are ready to
make and receive phone calls. Your
contacts on the phone are already
synchronized with the server—
there's no need to manually add them
to your phone.
For more information about installation
and startup, refer to the Polycom CX700
User Guide.