Back Panel
The back panel has the connections shown in the following figure.
See
Factory Settings
on page 110 for information about restoring factory settings.
N600 Wireless Dual Band Router WNDR3400v2
USB port
Restore Factory Settings button. Press and hold this
button for about 5 seconds to reset the router to its factory
default settings.
WiFi On/Off button
Four local area network (LAN) 10/100/1000 Mbps Ethernet
ports for connecting the router to your local computers.
Internet/Wide Area Network (WAN) Ethernet port for
connecting the router to a cable or DSL modem.
AC power adapter outlet for connecting the power adapter.
Power On/Off button.
Hardware Setup
13