120" self-contained LED screen
Technical Specifications
Picture / Display
•
Aspect ratio:
16:9
•
2
Brightness:
2000 cd/m
•
Diagonal screen size :
117 inch / 2974 mm
•
Display dimensions:
2592 x 1458 mm
•
Display screen type:
3 in 1 SMD LED
•
TM
Picture enhancement:
ASP
, SmoothPix
•
Panel resolution:
384 x 216 pixels
•
Viewing angle:
150° (H) / 150° (V)
•
Pixel pitch:
6.75 mm
•
Colour temperature:
6500 K
•
≥100 Hz
Refresh rate:
•
Grey scale:
15 bit
•
Colour resolution:
45 bit
•
Contrast ratio:
>10000
Supported Picture Input Standards
•
DVI-D Input
800x600, 1024x768, both at 50 & 60 Hz
•
Analogue Video Inputs
CVBS1 / CVBS2, YC1 / YC2, PAL, NTSC,
SECAM
RGBS, YPrPbS, 525/60 interlaced & 625/50
interlaced
•
SDI Input
BT.601, BT.656, SMPTE 125M (SD),
SMPTE 260M (HD), SMPTE 295M (HD),
SMPTE 296M (HD). All up to 1920 x 1080i (2:1)
or 1280 x 720p (1:1)
Connectivity
•
DVI-D Input:
24-pole female DVI connector. Non
HDCP.
•
CVBS1 / Y1 Input:
75 Ohm female BNC
connector. 1.0 V pp. into 75 Ohm.
•
CVBS2 / C1 Input:
75 Ohm female BNC
connector. 1.0 V pp. into 75 Ohm.
•
R/Pr Input:
75 Ohm female BNC connector.
0.7 V pp. into 75 Ohm.
•
G/Y Input:
75 Ohm female BNC connector.
1.0 V pp. into 75 Ohm.
Note: Any sync present is ignored.
•
B/Pb Input:
75 Ohm female BNC connector.
0.7 V pp. into 75 Ohm.
•
SYNC Input:
75 Ohm female BNC connector.
0.3 V pp. into 75 Ohm.
•
YC2 Input:
4-pole female mini DIN connector.
1.0 V pp. into 75 Ohm.
•
SDI Input:
75 Ohm female BNC connector.
0.8 V pp. into 75 Ohm.
SMPTE 292M / SMPTE 259M-C
•
RS232:
9-pole female D-connector.
Pin 2 Tx, 3 Rx, 5 GND. Pins 1, 4, & 6-9 N.C.
•
USB:
USB type B male connector.
Mounting
•
Lifting eyes:
2 x M20 lifting eyes in top surface
enable Candeo to be flown.
•
Rear attachment:
rear, enable Candeo to be attached to
2 x vertical beams, optional wall bracket, or
optional pedestal.
TM
Rear keypad / LCD Display
•
16 preset configurations:
of 16 different screen configurations e.g.
selected input, PIP (Picture in Picture).
•
Configurable presets:
using supplied software application which runs
on a PC.
Software Application for Remote
Control
•
Supplied software application:
control of input source selection and
brightness.
•
Built-in test patterns:
enables selection of test patterns to aid
installation setup and maintenance e.g. grey
scale, plain fields, moving rainbow.
•
Configuration of presets:
presets may be configured and then recalled
either remotely using software application, or
directly on Candeo, using rear keypad and
LCD display.
•
Connects via RS232:
supplied) connects to Candeo via RS232 port.
•
®
Microsoft
Windows
Power
•
Mains voltage:
•
Power consumption:
•
Mains connector:
Environmental
•
Ambient temperature:
•
Relative humidity:
•
Ingress protection:
•
LED lifetime:
>100000 hrs
Physical
•
Dimensions overall (w x h x d):
2892 x 1758 x 195 mm (9' 6" x 5' 9" x 7.7")
•
Weight:
363 kg (799 lb)
Accessories
•
Included accessories:
cable, control software, user manual.
•
Optional accessories:
* Microsoft® and Windows® are registered trademarks of
Microsoft Corporation.
1296
2892
2592
12 x M8 threaded holes on
Enables instant recall
Presets are configured
Enables remote
Software application
Up to 16 different
External PC (not
®
2000 and XP compatible*
200-240 V AC 50/60 Hz
2600 VA
IEC C20
+5 to +35°C operating.
0 to 95%
IP20
Mains cable, RS232
Wall bracket, pedestal.
POW ER
195.2
83.6
200-240 V. A.C. 50/60 H z.
W ARN IN G: H IGH LEAKAGE CURREN T
EART H CON N ECT IO N ESSEN T IAL BEFO RE CO N N ECT IN G SU PPLY
Candeo 6-120i
Product Features
Self-contained LED Screen
Simply connect your image source to the rear
connection panel, plug-in the mains supply and
switch on, to enjoy bright, vibrant, flicker-free
images.
TM
ASP
TM
Anti-Solarisation Processing
uses Philips
proprietary 45 bit colour processing to completely
eliminate unwanted solarisation effects
commonly seen on dark picture areas of LED
screens.
TM
SmoothPix
The excellent picture quality of Candeo is due to
the exceedingly high quality LEDs used in its
manufacture. The LEDs are carefully graded and
selected to ensure that only those meeting
stringent standards of light output and colour
purity, are used in Candeo.
Philips SmoothPix technology improves LED
matching still further, by measuring and adjusting
each LED during factory alignment, to provide
only the highest image quality.
Dynamic Power Control
Displaying images containing large areas of
white, normally requires a special mains supply.
DPC is a Philips development which dynamically
limits the power used for light images and
enables Candeo to be operated from a regular
European mains socket.
PIP
Candeo can display two input sources
simultaneously by overlaying one image on top of
the other (Picture In Picture). This might for
example comprise a computer graphic picture
(via the 'DVI' input), forming a background image,
with an overlaid video picture (via the 'CVBS1'
input), providing a foreground image.
Size and position of PIP image is set using
supplied software application.
Rear Maintenance Access
All maintenance is carried out through four large
doors on the rear. Each door is lockable, to
prevent unauthorised access.
Large Selection of Inputs
Candeo is provided with a large selection of
inputs, both analogue and digital, ensuring great
versatility.
Indicator LEDs on the connection panel show the
presence of sync pulses on each of the three
main input signal types and also indicate serial
data flow.
CVBS1
CVBS2
Y1
C1
SDI
DVI-D
R
G
B
Pr
Y
Pb
SYN C
YC2
RS232
USB
SYN C PRESEN T
O K
D VI
SDI VIDEO
T x
Rx
F1
F2