Related Manuals for Philips 193V5
Summary of Contents for Philips 193V5
- Page 1 193V5 www.philips.com/welcome EN User manual Customer care and warranty Troubleshooting & FAQs...
-
Page 2: Table Of Contents
4.1 Resolution & Preset Modes....17 5. Power Management ......18 6. Regulatory Information(Optional) ...19 7. Customer care and warrant .....25 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy ..........25 7.2 Customer Care & Warranty ....27 8. Troubleshooting & FAQs ....30 8.1 Troubleshooting ...........30... -
Page 3: Important
1. Important Please use approved power cord provided 1. Important by Philips all the time. If your power cord is missing, please contact with your local This electronic user’s guide is intended for service center. (Please refer to Customer anyone who uses the Philips monitor. Take time... -
Page 4: Notational Descriptions
1. Important Temperature: 0-40°C 32-95°F 1.2 Notational Descriptions Humidity: 20-80% RH The following subsections describe notational Important information for Burn-in/Ghost conventions used in this document. image. Notes, Cautions and Warnings Always activate a moving screen saver Throughout this guide, blocks of text may be program when you leave your monitor accompanied by an icon and printed in bold or unattended. -
Page 5: Disposal Of Product And Packing
WEEE performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation innational take-back initiatives and recycling programs whenever possible,... -
Page 6: Setting Up The Monitor
2.1 Installation 2. Attach/slide the base column with the Package contents monitor until it clicks into position. Register your product and get support at 193V5 www.philips.com/welcome Quick Start 3. Hold the monitor base stand with both hands and firmly insert the base stand into the base column. -
Page 7: Operating The Monitor
2. Turn off your computer and unplug its On-Screen Display (OSD) is a feature in all power cable. Philips LCD monitors. It allows an end user to 3. Connect the monitor signal cable to the adjust screen performance or select functions... -
Page 8: Adjust Osd With Single Key
2. Setting up the monitor How to adjust OSD with a single key? The OSD Menu Below is an overall view of the structure of 1. The key on the bottom of the front bezel the On-Screen Display. You can use this as a provides dual functions to control power on/ off reference when you want to work your way and OSD menu setting. -
Page 9: Remove Base Stand
2. Setting up the monitor Note 2.3 Remove Base Stand This monitor accepts a 100mm x 100mm VESA- Remove the Base Stand Compliant mounting interface. Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 100mm 1. -
Page 10: Image Optimization
3. Image Optimization Icon based software is ready to enhance your 3. Image Optimization experience with Philips monitors! Installation 3.1 SmartContrast Follow the instruction and complete the installation. What is it? You can launch after installation is A unique technology that dynamically analyzes completed. - Page 11 3. Image Optimization Start with Standard pane: Adjust menu: Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. You can follow the instruction and do the adjustment. Cancel prompts user if you want to cancel installation.
- Page 12 3. Image Optimization Color menu: Color Menu allow you to adjust RGB, Black Level, White Point, and Color Calibration. You can follow the instruction and do the adjustment. Refer to below table for sub-menu item base on your input. Example for Color Calibration:...
- Page 13 3. Image Optimization 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the Cancel button. 5. Enable color calibration - by default is on. If unchecked, does not allow for color calibration to happen, dimes out start and quick view buttons.
- Page 14 3. Image Optimization Options>Input - Will only be active when On a non-supported display capable of DDC/ selecting Input from the drop-down Options CI, only the Help and Options tabs are available. menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available.
- Page 15 3. Image Optimization The task tray has five entries: Help - Access to User Manual file: Open User Manual file using the default browser window. Technical Support - displays the tech support page. Context Sensitive menu Check for Update - takes the user to PDI The Context Sensitive menu is Enabled by Landing and checks the user’s version default.
- Page 16 3. Image Optimization from the task tray, disable Run at Startup in Options>Preferences. Note All the illustrations in this section are for reference only. SmartControl software version might be changed without notification. Please always check official Portrait website www.portrait.com/dtune/phl/enu/index to download the latest version of SmartControl software.
-
Page 17: Technical Specifications
4. Technical Specifications Picture/Display Monitor Panel Type TFT-LCD Backlight Panel Size 18.5" W (47cm) Aspect Ratio 16:9 Pixel Pitch 0.3 x 0.3 mm Brightness 200 cd/m² SmartContrast 10,000,000:1 Contrast Ratio (typ.) 700:1 Response Time (typ.) Optimum Resolution 1366 x 768 @ 60Hz Viewing Angle 90°... - Page 18 Finish Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the...
-
Page 19: Resolution & Preset Modes
4.1 Resolution & Preset Modes Maximum Resolution 1366 x 768 @ 60 Hz H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 640 x 480 66.67 37.86 640 x 480 72.81 37.5 640 x 480 37.88 800 x 600... -
Page 20: Power Management
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 21: Regulatory Information(Optional)
Information Technology Equipment). electronic equipment have been adhered to EN61000-3-2:2006 +A1:2009+A2:2009 in order to make Philips monitors safe to use (Limits for Harmonic Current Emission). throughout its life cycle. EN61000-3-3:2008 (Limitation of Voltage EPEAT Fluctuation and Flicker) following provisions of directives applicable. - Page 22 6. Regulatory Infomation ® meets the ENERGY STAR guidelines for Use only RF shielded cable that was supplied energy efficiency. with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or Note shock hazard, do not expose this appliance to We recommend you switch off the monitor...
- Page 23 6. Regulatory Infomation des hyperfréquences qui, si l'appareil n'est EN 55022 Compliance (Czech Republic Only) pas installé et utilisé selon les consignes données, peuvent causer des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière.
- Page 24 6. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht Placering/Ventilation den in der "Verordnung über den Schutz vor VARNING: Schäden durch Röntgenstrahlen" festgelegten FÖRSÄKRA DIG OM ATT HUVUDBRYTARE Vorschriften. OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.
- Page 25 6. Regulatory Infomation China RoHS EU Energy Label The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and Monitor which are produced and sold for China market have to meet China RoHS request.
-
Page 26: Customer Care And Warrant
No manufacturer can guarantee the types of bright dot defects. that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type. - Page 27 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
-
Page 28: Customer Care & Warranty
7.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region:... - Page 29 7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center Consumer care number Belarus +375 17 217 3386 Bulgaria LAN Service +359 2 960 2360 Croatia Renoprom +385 1 333 0974 Estonia FUJITSU +372 6519900 Latvia “ServiceNet LV”...
- Page 30 1661 – 5003 After Market Solutions (CE) Malaysia 603 7953 3370 Sdn Bhd Pakistan Philips Consumer Service (9221) 2737411-16 Philips Electronics Singapore Singapore Pte Ltd (Philips Consumer Care (65) 6882 3999 Center) PCCW Taiwan Teleservices FETEC.CO 0800-231-099 Taiwan Thailand Axis Computer System Co., Ltd. (662) 934-5498...
-
Page 31: Troubleshooting & Faqs
Do not perform any troubleshooting steps Philips customer service representative. Disconnect the monitor from mains power source immediately for safety Common Problems Contact with Philips customer service No Picture (Power LED not lit) representative immediately. Make sure the power cord is plugged into Imaging Problems the power outlet and into the back of the monitor. -
Page 32: General Faqs
Eliminate the vertical bars using the Phase/ For further assistance, refer to the Consumer Clock of Setup in OSD Main Controls. It is Information Centers list and contact Philips valid only in VGA mode. customer service representative. Image appears blurred, indistinct or too dark 8.2 General FAQs... - Page 33 PC, workstation or Mac? blunt objects. When handling the monitor, Ans.: Yes. All Philips LCD monitors are fully make sure that there is no pressure or compatible with standard PCs, Macs force applied to the panel surface side.
- Page 34 8. Troubleshooting & FAQs imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content.
- Page 35 © 2013 Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.