Cisco WAP321 Datasheet page 6

Specifications
Internal antennas
Antenna gain in dBi
Transmitted output power
Receiver sensitivity
Wireless Distribution System
(WDS)
Roaming
Fast roaming
Active WLAN clients
Multiple SSIDs
Wireless VLAN map
WLAN security
Wi-Fi Multimedia (WMM)
Operating Modes
Access point
Environmental
Power
Certifications
Operating temperature
Storage temperature
Operating humidity
Storage humidity
Mean time between failures
(MTBF)
Package Contents
● Cisco WAP321 Wireless-N Selectable-Band Access Point with Single Point Setup
● Ceiling/wall mounting kit
● User guide on CD-ROM
● Quick-start guide
● Ethernet network cable
Minimum Requirements
● 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
● Switch/router with PoE support or PoE injector when used with PoE
● Web-based configuration: Java-enabled web browser
Warranty
Access point
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Description
Internal fixed PIFA antenna
2 dBi each antenna
● 802.11b @ 11 Mbps: 17 dBm
● 802.11g @ 54 Mbps: 13 dBm
● 802.11n @ HT20HT40, MCS15: 13 dBm
● 802.11b: 11 Mbps @ –86 dBm
● 802.11g: 54 Mbps @ –71 dBm
● 802.11n: 300 Mbps @ –64 dBm
Yes
Yes
802.11i preauthentication
Same as number of users: 32 max connected users, 20 active users recommended
8
Yes
Yes
Yes, with automatic power save, and Voice profile
Access Point mode, WDS bridging, Workgroup Bridge mode
12V 1A DC input, and IEEE 802.3af compliant PoE
FCC class B, CE, IC, Wi-Fi
0° to 40° C (32° to 104° F)
–20° to 70° C (–4° to 158° F)
10% to 85% noncondensing
5% to 90% noncondensing
492281 hours
Limited lifetime
Page 6 of 8