HP Compaq 6000 Pro Quickspecs page 42

QuickSpecs
Technical Specifications - Internal Storage
10,000 RPM Serial ATA
Hard Drives
64 GB Solid State Drive
80-GB Capacity
Height
Width
Interface
Synchronous Transfer
Rate (Maximum)
Cache
Seek Time (typical reads,
includes controller
overhead, including
settling)
Rotational Speed
Logical Blocks
Operating Temperature
Capacity
NAND Flash Memory
Interface type
Dimensions-external
(W x H x D)
Weight
Internal transfer rate
Host transfer rate
Power
Environmental
(all conditions, non-
condensing)
Regulations
* For solid state disk drives, GB means 1 billion bytes. 16GB is the unformatted capacity of this drive
before a portion of the drive is reserved for flash management features. Actual capacity varies by content
and will be less than 15.8GB.
DA - 13411 North America — Version 24 — October 19, 2011
80,026,361,856 bytes
1 in (2.54 cm)
Media diameter: 2.5 in (? cm)
Physical size: 4 in (10.2 cm)
Serial ATA (1.5 Gb/s), Native Command Queuing enabled
Up to 3.0 Gb/s
16 Mbytes
Single Track
Average
Full-Stroke
10,000 rpm
156,301,488
41° to 131° F (5° to 55° C)
64 GB
Multi Level Cell (MLC) with wear leveling controller
SATA 3Gb/sec
2.74 x 0.37 x 4 in (6.98 x 0.95 x 10.2 cm)
0.14 lb (65 g)
Write speed
Read speed
Ultra DMA mode
DC power requirement
Total power consumption <1.12Watt
Temperature (operating) 32° to 158° F (0° to 70° C)
Relative Humidity
(operating)
Maximum Wet Bulb
Temperature (operating)
UL, CSA, EN 60950-2000, CISPR Pub 22 Class B, CNS 13438, AS/NZS CISPR
22:2002 Class B, R1113 and C1172 Class B
HP Compaq 6000 Pro Business PC
0.3 ms
4.6 ms
10.2 ms
Up to 220 MB/s
Up to 120 MB/s
Up to 150 MB/s
5 VDC 5%-100 mV ripple p-p
5% to 95%
84° F (29° C)
Page 42