Operating Instructions - Danby DPA120B1WB Owner's Use And Care Manual

Operating Instructions

OPERATING MODES
(con't)
POWER OUTAGE
AIR FLOW DIRECTION
ADJUSTMENT
SLEEP cycle
This unit features an operation mode that is designed to keep you
comfortable while sleeping, and save you money on your energy bill.
Simply press the sleep button. Depending on whether the unit is in heat-
ing or cooling mode, the temperature will either increase (cooling mode)
or decrease (heating mode) by 1°C / 2°F every half hour for 1 hour. It will
then hold this new temperature for 7 hours before returning to the original
temperature setting and resuming normal operation.
NOTE: This feature is unavailable in FAN and DRY mode.
In case of a power outage or interruption, the unit will automatically re-
start in the default settings after the power is restored.
Wait 3 minutes before resuming operation
After the unit has stopped, it can not operate for 3 minutes. This is to pro-
tect the unit. Operation will automatically start after 3 minutes.
Adjust the air flow direction automatically (Fig. 4):
- The louver can be adjusted automatically, to change the airflow
direction. (Fig.4)
- When the power is ON, the louver opens fully.
- Press the SWING button on the panel or remote controller to initiate the
Auto swing feature.
- The louver willl swing up and down automatically.
Please do not adjust the louver manually.
Swing automatically
9
Fig.4