Switching To The Held Party (Alternating) - Siemens OpenScape Voice Operating Manual

Step by Step
Alternate
Disconnect
Disconnect & return

Switching to the held party (alternating)

Prerequisite: You are conducting a consultation call
page 64 or have accepted a second call
Select and confirm the option shown in the connec-
tion's context menu.
It does not matter which context menu is open
when alternating. The "Alternate" function ap-
pears in both menus (active and passive connec-
tion).
You can switch back and forth between two sub-
scribers by repeatedly selecting and confirming
"Alternate".
Ending an alternate operation
Disconnecting the held call:
Select and confirm the option shown in the held con-
nection's context menu.
The held call is disconnected. The active call continues.
Disconnecting the active call:
Select and confirm the option shown in the active con-
nection's context menu.
The active call is disconnected. The held call remains on
hold and can be managed via the context menu.
Basic functions
page 90.
65