Security Menu; Diagnostics Menu - HP Compaq 320 Maintenance And Service Manual

Security menu

NOTE: Some of the menu items listed in this section may not be supported by your computer or your
operating system.
Select
Setup Password
Password Options
DriveLock Passwords
System IDs
Disk Sanitizer

Diagnostics menu

NOTE: Some of the menu items listed in this section may not be supported by your computer or your
operating system.
Select
HDD Self-Test Options
Memory Check
126 Chapter 5 Computer Setup
To do this
Enter, change, or delete a setup password.
●
Enable/disable stringent security.
●
Enable/disable the password requirement on computer
restart.
●
Enable/disable DriveLock on any computer hard drive.
●
Enter, change, or disable DriveLock on an optional
MultiBay hard drive.
NOTE: DriveLock settings are accessible only when you
enter Computer Setup by turning on (not restarting) the
computer.
Enter a user-defined computer asset tracking number and
ownership tag.
Run Disk Sanitizer to destroy all existing data on the primary
hard drive. The following options are available:
●
Fast: Runs the Disk Sanitizer erase cycle once.
●
Optimum: Runs the Disk Sanitizer erase cycle 3 times.
●
Custom: Allows you to select the desired number of Disk
Sanitizer erase cycles from a list.
CAUTION: If you run Disk Sanitizer, the data on the
primary hard drive is destroyed permanently.
To do this
Run a comprehensive self-test on any hard drive in the system
or on any optional MultiBay hard drive.
Run a comprehensive check on system memory.