Adjusting The Picture Quality - Toshiba 32L4300UC User Manual

Adjusting the picture quality

The adjustments you make to picture quality under a picture mode are
saved to that picture mode.
Selection
Backlight*
Contrast
Brightness
Color
Tint
Sharpness
* Backlight: Adjusts the brightness of the entire screen. When in video mode and
no signal is input, this selection is set to 0. (Settings are stored in memory.)
NOTE
To adjust the picture quality:
1 Press the SETUP button.
2 Select Picture and press the OK button.
3
Press the p / q (arrow) buttons to select the setting you would
like to adjust (Backlight, Contrast, Brightness, Color, Tint, or
Sharpness).
4
Press the u (arrow) button.
5 Press the t / u (arrow) buttons to adjust the setting.
6 Press the EXIT button.
NOTE
To reset to the factory defaults:
1 Press the SETUP button.
2 Select Picture > Reset.
3 Press the OK button.
A confirmation screen appears.
4 Press the t / u (arrow) buttons to select Yes, and then press the OK
button.
Press ( t )
Darker
Lower
Darker
Paler
Reddish
Softer
Some settings cannot be adjusted when the picture mode is set to
AutoView.
Any picture settings that you adjust affect the current input only.
❖
You can adjust the picture quality separately for each input.
Depending on a Sharpness value, the Edge Enhancer effect may be
❖
reduced.
Picture and Sound Controls
Adjusting the picture
Press ( u )
Lighter
Higher
Lighter
Deeper
Greenish
Sharper
95