Epson LQ-300+ User Manual page 46

Packet mode
Select Auto to use the IEEE-1284.4 packet transfer mode. If packet
transfer mode is unnecessary, or if you cannot connect, turn this
off.
Character table
You can select from among 13 to 36 standard character tables,
depending on the country of purchase. See "Character tables" on
page A-7 for more information on the tables.
International character set for Italic table
You can select among several international character sets for the
Italic character table. Each character set contains eight characters
that vary depending on the country or language, so you can
customize the Italic table to suit your printing needs.
Pitch
You can select from among six pitch settings.
Font
You can select six fonts in the Default Setting mode. The font
selected here appears under Others on the control panel. The
fonts indicated on the control panel cannot be selected in the
Default Setting mode.
Auto CR (carriage return)
This setting is available only in the IBM 2390 Plus emulation
mode. When auto carriage return is on, each line feed (LF) code
or ESC J code is accompanied by a carriage return code. This
moves the print position to the beginning of the next line.
2-8
Using the Printer