Belkin Wireless G Ethernet Adapter User Manual page 31

Troubleshooting
Power LED does not come ON; Adapter is not working
If the LED indicators are not ON, the problem may be that the
Adapter's power supply is not connected or installed properly.
Verify that the Adapter's power supply is connected to the
power port on the Adapter and that the power supply is firmly
connected into a working power outlet.
Installation CD-ROM does not start Setup Utility
If the CD-ROM does not start the Setup Utility automatically, it
could be that the computer is running other applications that are
interfering with the CD drive.
If the Setup Utility screen does not appear within 15-20
seconds, open up your CD-ROM drive by double-clicking on
the "My Computer" icon. Next, double-click on the CD-ROM
drive that the Installation CD has been placed in to start the
installation. Then, double-click on the icon named "setup.exe".
Ethernet Link LED does not come ON
If the Ethernet Link LED does not come ON, the problem may be
that the Adapter is not connected or installed properly.
Verify that the Adapter's Ethernet cable is plugged firmly into
the RJ-45 port of the Adapter and to your computer or gaming
console.
29 29
1
2
3
4
5
6
7
8