Clearing The Configuration; Bios Configuration Utility Menu Options - Dell PowerEdge RAID H700 User Manual

Clearing the Configuration

You can delete all virtual disks on the RAID controller by performing
the operation.
To clear the configuration, perform the following steps in the BIOS
Configuration Utility:
1 Press <Ctrl><N> to access the VD Mgmt screen.
2 Use the arrow keys to move the cursor to the Controller heading.
3 Press <F2>. The action menu is displayed.
4 Select Clear Config.
A pop-up window is displayed prompting for confirmation to delete all
virtual disks.
5 Select NO to delete the virtual disks or YES to retain the existing
configuration.

BIOS Configuration Utility Menu Options

The first menu that is displayed when you access the BIOS Configuration
Utility is the main menu screen. It lists the controller, controller number, and
other information, such as the slot number. On the screen, you can use the
arrow keys to select the RAID controller you want to configure. Press
<Enter> to access the controller.
This section describes the options for the BIOS Configuration Utility for
each of the major menus:
• Virtual Disk Management (VD Mgmt) menu
• Physical Disk Management (PD Mgmt) menu
• Controller Management (Ctrl Mgmt) menu
• Foreign Configuration View (Foreign View) menu
Configuring and Managing RAID
99