Chapter 2: Applications Supported By Dell Hba355I And Dell Hba355E; Human Interface Infrastructure Configuration Utility; Dell Openmanage Storage Management; The Integrated Dell Remote Access Controller And Lifecycle Controller - Dell HBA355i User Manual

Applications supported by Dell HBA355i and
The Dell HBA355i and Dell HBA355e management applications include the Human Interface Infrastructure Configuration Utility
(HII), Dell OpenManage Storage Management, command line interface, the Integrated Dell Remote Access Controller (iDRAC),
and Lifecycle Controller (LC). They enable you to manage and configure the RAID system, create and manage a disk group, and
provide online maintenance.
Topics:
•

Human Interface Infrastructure Configuration Utility

•

Dell OpenManage Storage Management

•

The Integrated Dell Remote Access Controller and Lifecycle Controller

•

The Command Line Interface

Human Interface Infrastructure Configuration Utility
The Human Interface Infrastructure (HII) configuration utility is a storage management application integrated into the System
BIOS <F2>. It is used to configure physical disks. This utility is independent of the operating system. For more information about
HII, see HII configuration utility.
Dell OpenManage Storage Management
Dell OpenManage Storage Management enables you to perform controller and enclosure functions for all supported RAID or
Non-RAID controllers and enclosures from a single graphical or command line interface. For more information, see the Dell
OpenManage Storage Management User's Guide at www.dell.com/openmanagemanuals.
The Integrated Dell Remote Access Controller and
Lifecycle Controller
The Integrated Dell Remote Access Controller (iDRAC) and Lifecycle Controller (LC) application enables you to effectively
monitor the RAID and network controllers installed on the system using iDRAC and LC without an operating system installed
on the system. For more information, see the Integrated Dell Remote Access Controller 9 User's Guide at
idracmanuals.
The Command Line Interface
The Command Line Interface (CLI) is a storage management application. This utility allows you to set up, configure, and manage
your Dell Technologies Host Bus Adapter by using the Command Line Interface (CLI).
NOTE: For more information, see Dell EMC PowerEdge RAID Controller CLI Reference Guide at
storagecontrollermanuals.
10 Applications supported by Dell HBA355i and Dell HBA355e
Dell HBA355e
www.dell.com/
www.dell.com/
2