Dirt Devil Vacuum Cleaner Owner's Manual page 7

Clip turbo tool onto the front
Wrap hose around back of Align tabs on clear dirt passage window
of the turbo tool caddy.
hose caddy (Diagram 1). Push with the slots on the lower hose cuff. Push
hose wand down into the right and turn hose clockwise until secure.
side of cleaner (Diagram la).
TOOL STORAGE INSTALL DIRT INSTALL DIRT
CONTAINER LID CONTAINER
Attach tools: (a) slide the Align slots on lid with tabs on con- Set aligning tab on bottom of
dust brush onto post on the tainer (Diagram 4). Push the lid dirt container into rectangu-
upper tool caddy with bris- down and twist clockwise. NOTE: lar slot on cleaner (Diagram
tles facing out. (b) Slide the There is a guide arrow on back of 5), and push to snap into
extension wandlcrevice tool
lid. Align arrow with right edge of place (Diagram 5a).
into round slot on the front dirt container handle and turn clock-
right side of tool caddy. wise until secure (Diagram 4a).
CORD RELEASE HEIGHT ADJUZ
surface being cleaned.
IMPORTANT: FOR
MENT, PLACE
CLEANER IN FULL
I 1 1 1 1 - 1
UPRIGHT POSITION.