Dirt Devil Vacuum Cleaner Owner's Manual page 6

lODY TO NOZZLE
Slide the back panel onto
To secure, insert two (2)
base.
screws into the front of the
back panel.
UPPER TOOL CADDY (BACK)
Slide end of long hose Align carry handle holes
onto back panel dirt with holes on back
tube. Turn counterclock- panel. Slide handle for-
wide to secure. ward. Insert two (2)
screws into the holes
and tighten until secure.
HANDLE (BACK) AND TURBO TOOL"
CADDY (FRONT) ASSEMBLY
Place hose caddy on to Gently push metal han-
the top of body base. dle down into hole on
hose caddy.
Place turbo tool caddy onto Attach turbo tool clip into Insert the two (2) screws
the front of the vacuum mid-
turbo tool caddy.
into the back of the handle
section. and tighten, making sure the
tool caddy is attached.