How To Unset The System - Honeywell Accenta User Manual

Accenta/Optima User Guide

How to Unset the System

When you enter your premises you need to unset (turn off) the system.
LCD Keypad:
• Enter the premises by the agreed entry route. Thesystem
produces an entry tone. The
off, indicating that the system is set.
• Enter your 4-digit code (0123 default).
• The system unsets with a double beep. The LED comes on,
indicating that the system is unset.
• After 30 seconds the system displays the date and time.
LED Keypad:
• Enter the premises by the agreed entry route. Thesystem
produces an entry tone. The
indicating that the system is set.
• Enter your 4-digit code (0123 by default).
• The system unsets with a double beep. The LED comes on
indicating that the system is unset.
If any Zone, (Tamper) or
have taken place. Seek assistance before investigating further as intruders may still be on the premises. Then
reset the system.
When you enter your premises you have a short period of time, usually 30 seconds, to enter your code. If you
fail to do this the system goes into alarm. Enter your code to stop the alarm.
LED is on and the LED is
LED is on and the
(Attack) LED's come on then an alarm has occurred, and an intrusion may
3
How to Unset the System
S u n d a y
** SYSTEM UNSET **
S u n d a y
LED is off,
0 1 - J a n
14:10
[4-digit code]
0 1 - J a n
14:10
[4-digit code]