Accenta/Optima User Guide
Changing Codes Using User 2
Your alarm system can have a second user code. You may find it useful to set up user code 2 for use by a
neighbour for use when you are on holiday. User code 2 operates like user code 1, but it cannot be used to
change or delete user code 1.
To change user code 2:
LCD Keypad:
•
Press
and then enter user 2 [4-digit code]. The
LED goes off to indicate that you are in Programming
mode. The first menu Walk Test appears on the screen.
•
Press [8] to edit user 2.
•
Enter the new [4-digit code]. If the code is accepted the
system produces a double beep. If it is rejected the code
may already be in use and the system produces a long tone.
You must choose a different 4-digit code.
•
Upon the last keypress the code is saved.
•
Press
twice to exit Programming mode. The LED
comes on and the screen shows the date and time.
LED Keypad:
•
Press
and then enter user 2 [4-digit code]. The
LED comes on and the LED goes off to indicate that you are in
Programming mode.
•
Press the [8] to edit user 2. LED's 1-4 are on.
•
Enter the new [4-digit code]. If the code is accepted the
system produces a double beep. If it is rejected the code
may already be in use and the system will produce a flat tone.
You must choose a different 4-digit code.
•
Upon the last keypress the code is saved. LED's 1-4 are off.
•
Press
twice to exit Programming mode. The LED
comes on and the
goes off.
How to Delete User Code 2
0>Walk Test
Edit Code
- - - -
S u n d a y
11
then [4-digit code]
[8]
[4-digit code]
Code Saved
0 1 - J a n
14:10
then [4-digit code]
1 2 3 4 5 6 7 8
Zones
[8]
[4-digit code]
1 2 3 4 5 6 7 8
Zones
1 2 3 4 5 6 7 8
Zones