Preparing The Lcd For Wall Mounting; Adjusting Basic Lcd Tv Settings - Vizio L32 User Manual

32” lcd television
Hide thumbs Also See for L32:
Table of Contents

Advertisement

3.3 - Preparing the LCD for Wall Mounting

VIZIO offers certifed wall mounts and professional Installation services. To purchase a wall mount
or have your VIZIO L32 installed contact VIZIO at www.vizioce.com or call toll free 1-888-VIZIOCE.
The VIZIO L32 can either be kept on the base stand or mounted to the wall for viewing. If you
choose to mount the L32 to the wall, please follow the instructions below for removing the base
stand.
To remove the stand base:
1. Unplug all the cables and cords from the LCD TV.
2. Place the LCD TV face down on a soft and flat surface (blanket,
foam, cloth, etc) to prevent any damage to the display.
3. Remove the 4 screws on the back panel of the TV located near
the bottom so that the base stand can be removed (see Figure
3.3a).
4. Gently pull the stand away from the display by grasping firmly to
the base.
5. Now, the display can fit securely to a mount (sold separately) by
utilizing the mounting holes in the center of the back panel of the
display (see Figure 3.3b). Please make sure to read the
directions of your specific wall mount to properly hang the L32.

3.4 - Adjusting Basic LCD TV Settings

Volume
To increase the volume, press and hold the VOL + button on the front panel or remote
control until the desired level is reached.
To decrease the volume, press and hold the - VOL button on the front panel or remote
control until the desired level is reached.
TV Channels
To step up through the available TV channels, press the CH + button on the front panel
or remote control once for the next channel or hold it depressed until the desired channel
is reached.
To step down through the available TV channels, press the - CH button on the front panel
or remote control once for the previous channel or hold it depressed until the desired
channel is reached.
Wide
Using this feature you can watch video content in Wide, Zoom, Panoramic, or Normal
mode. Press the WIDE button on the remote control to switch among the modes.
Version - 4/14/2005
24
www.vizioce.com
VIZIO L32 User Guide
Figure 3.3a
Figure 3.3b

Advertisement

Table of Contents
loading

Table of Contents