Watching A Tv Program - Vizio L32 User Manual

6. Connecting to a PC
If connecting to a PC through RGB (Analog RGB) input, set LCD TV timing mode to
VESA 1024 x 768 at 60Hz for best picture quality (refer to the graphic card's user guide
for questions on how to set this timing mode).

3.2 - Watching a TV program

Before you start watching TV, please make sure that any cable, satellite, or off-air antenna
connections are secure. Also, verify that the power cord is plugged into a correctly grounded
electrical outlet or surge protector.
1. Press the power button on the front of your LCD TV. The status LED on the front turns
green.
2. There are 3 options for selecting your programming:
a. Select TV using the INPUT button on the front of your LCD TV if you are
watching a cable set-top box, satellite dish, or off-air antenna connected through
the RF input.
b. Select Digital HD using the Input button on the front of your LCD TV if you are
watching broadcasts through a cable set-top box or satellite dish connected by
HDMI.
c. Select Analog HD using the Input button on the front of your LCD TV if you are
watching a cable set-top box or satellite dish connected through the component
inputs (YPbPr).
Note: You should be able to see a picture. If you do not, make sure that all connections are
secure and you have selected the correct video input source.
3. Press the Channel ▼/▲ buttons on the front of your LCD TV to change the channel.
Note: The Channel ▼/▲ buttons on the front of the TV do not work if you are watching a
program using HDTV input.
To make additional adjustments to your LCD TV, please see "Section 3.4: Adjusting Basic LCD
TV Settings" on page 24.
Version - 4/14/2005 23
www.vizioce.com
VIZIO L32 User Guide